Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 15 May 2003 05:33:50 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Thanks Carl for your response. One more question, was in the low
side or the high of the soldered TC?
Regards,
Ramon
> -----Original Message-----
> From: Carlr Ray [SMTP:[log in to unmask]]
> Sent: Wednesday, May 14, 2003 3:54 PM
> To: [log in to unmask]
> Subject: Re: [TN] Profile
>
> Ramon,
> I have seen some difference between a soldered TC and Kapton Taped TC.
> From my experience I have seen around 4-6 degrees. We normally use the
> soldered TC to develop the process and then used the tape (twice a week)
> to verify the process is in control. Of course every month we follow up
> this method with a solder TC as additional verification.
>
> >>> [log in to unmask] 05/14/03 02:40PM >>>
> Has anybody profiled a board and compared the temperature
> difference
> between a TC soldered to a joint and a TC taped to the same joint?
> Was it just one or two or several degrees, and if the latter how many?
> Regards,
> Ramon
>
> ---------------------------------------------------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
>
> Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
> ext.5315
> -----------------------------------------------------
>
> ---------------------------------------------------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
> ext.5315
> -----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
|
|