Sender: |
|
X-To: |
|
Date: |
Mon, 19 May 2003 15:21:37 -0400 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
Content-Type: |
text/plain; charset="iso-8859-1" |
From: |
|
Parts/Attachments: |
|
|
Inner layer separation between the electroless copper plating and the inner
layer copper foil is normally always due to under micro etch, over
conditioning or accelerating, re-oxidation of the copper surface or
contamination.
Hope this helps.
Scott B. Westheimer
Gul Technologies PTE
5709 Clarks Fork Drive
Raleigh, North Carolina 27616
Phone: (919)713-4358
Fax: (919)713-4358
Cell: (919)649-1510
Email: [log in to unmask]
http:///www.gultech.com
----- Original Message -----
From: "No Name" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, May 19, 2003 2:05 PM
Subject: [TN] Inner layer separation
> Inner layer separation ....
> What are the major board fab causes?
> What are the major board assembly causes?
>
> ---------------------------------------------------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
> -----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
|
|