TECHNET Archives

April 2003

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Zweigart, Siegmund" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Wed, 23 Apr 2003 10:04:44 +0200
Content-Type:
text/plain
Parts/Attachments:
text/plain (63 lines)
Hello

Did you also look into this semi flex material?
In this case the flex part is made of thin FR4.
It seems to be cheaper than the Polyimide solution and it is not
hygroscopic.
The material is rated for 5 to 10 bending cycles (should be enough for
mounting)

Siggi

-----Original Message-----
From: Roger Stoops [mailto:[log in to unmask]]
Sent: Dienstag, 22. April 2003 22:26
To: [log in to unmask]
Subject: [TN] Cost Comparison of Flex Circuit Mat'l


Dear all,

  I guess there are two basic types of Cu-clad polyimide: Cu-clad polyimide
with adhesive and adhesiveless Cu-clad polyimide.  I am curious as to the
relative cost of each, and the advantages or limitations of using either
one.  The end use is Class 2, Type 5A (flex to install), in a (fairly)
sealed enclosure that will see temps of -20C to +85C.  Only two copper
layers, no plated holes.

  In the past our FPCs have always been of the Cu-adhesive-polyimide type.
I want to know if there would be any advantage to using the adhesiveless
stuff, besides thinner circuits.

Cordially,

Roger M. Stoops, CID
Trimble Navigation Ltd., Dayton, OH, USA
Ph: 937.233.8921  or  937.233.4574  ext 288
Fax: 937.233.7511

---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------

ATOM RSS1 RSS2