hi all,

we are using gold finger pads on the pcb. but after going thru smt process
of screen printing,component insertion, reflow and aqueous wash we are
facing the problem of grey color dots on the pads.

This problem is with the pads where no components are being placed.

There is no solder paste printing on these pads nor any components are
place there and they are being covered with Kapton tape thru out the above
process.


Can anyone point to some reasons for this problem?????

---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------