Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 25 Apr 2003 15:18:54 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Bill,
For .8 mm pitch BGAs, you shouldn't have to use
via-in-pad. You should be able to use 19 mils via
pads with 10 mils vias in Dog bone design.
Ted
--- "Brooks,Bill" <[log in to unmask]> wrote:
> I have a board to do that is incorporating a .8mm
> pitch BGA chip on it and I
> am gathering info on the layout suggestions for that
> type of pad geometry.
> Do any of you have experience with this type of
> layout challenge that you
> would be willing to share?
>
> There are suggestions out there that incorporate HDI
> 'via-in-pad' solutions
> and others suggest 'Dog-boning' a .45mm [.018"] via
> pad with a .2mm [.008"]
> plated thru hole in it. I would really like to hear
> from someone who has
> done this successfully and also some of the problems
> they encountered.
>
> Thanks in advance.
>
>
> Bill Brooks, CID
>
> ---------------------------------------------------
> Technet Mail List provided as a free service by IPC
> using LISTSERV 1.8e
> To unsubscribe, send a message to [log in to unmask]
> with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of
> Technet send e-mail to [log in to unmask]: SET Technet
> NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts:
> send e-mail to [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at:
> http://listserv.ipc.org/archives
> Please visit IPC web site
> http://www.ipc.org/html/forum.htm for additional
> information, or contact Keach Sasamori at
> [log in to unmask] or 847-509-9700 ext.5315
>
-----------------------------------------------------
__________________________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo
http://search.yahoo.com
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
|
|