Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 27 Mar 2003 13:17:36 +0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Rich,
I had an evaluation kit from Circuit Technology Centre that uses film
adhesives, and found it both clean and easy to use. It was designed to
effect repairs in compliance with IPC-7721, and certainly appeared to do
the job.
http://www.circuittechctr.com
Peter
Rich Lasko <[log in to unmask]> 26/03/2003 10:33 PM
Sent by: TechNet <[log in to unmask]>
Please respond to "TechNet E-Mail Forum."; Please respond to Rich Lasko
To: [log in to unmask]
cc: (bcc: DUNCAN Peter/Asst Prin Engr/ST Aero/ST Group)
Subject: [TN] IPC-7721 Conformance Levels
Good morning everyone,
I am looking for some information on the "highest" level conformance (see
pg 2 of IPC-7721) for a Class 3 product.? I am currently faced with a
situation in which we had some SMT aluminum Electrolytic capacitors shear
off the board (and took the pad and trace with it). ?Boards are about $800
a pop so I really don't want to be scrapping that kind of cha-ching.? I am
looking to use section 4.2.2 and section 4.7.2 (SMT repair with film
adhesive).? I see that PACE makes a ThermoBond Cir-Kit with film adhesives
but I have not had any personal experience using this one.? (I am used to
using the epoxy type repair kits).? So before I go out and spent some
$$$'s, I was hoping to get some feedback from the group on their
experiences with film adhesive repair kits or any other film adhesives kits
that have worked well.
Looking forward to your feedback.
Rich Lasko
Badger Electronics
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
-----------------------------------------------------
[This e-mail is confidential and may also be privileged. If you are not the
intended recipient, please delete it and notify us immediately; you should
not copy or use it for any purpose, nor disclose its contents to any other
person. Thank you.]
|
|
|