Content-Type: |
text/plain |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Mon, 3 Mar 2003 06:33:03 -0800 |
MIME-Version: |
1.0 |
X-To: |
|
Reply-To: |
|
Parts/Attachments: |
|
|
Does anybody have experience with spacers made by Robison
Electronics, Inc. for 8 and 10 leaded round pattern 0.220 in. to 0.400 in.
metal can ICs ? This spacers not only keep the Can ICs off the board but
form the leads from a round pattern of 0.220 to 0.400 in. The reason I have
a question is that at close observation the leads bend outwards from the
base slightly when the leads are inserted through the spacer. In the ANSI J
standard, it states that when forming a lead the bend should start at a
minimum of one lead thickness.
Thanks in advance for your inputs.
Regards,
Ramon
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
|
|