It would be the cost to replace it. You bring up a great point. A roll of
tape may only be valued at $50 but to reorder that same role may take a
$500 minimum buy.
"Marsico, James"
<James.Marsico@dp To: "'TechNet E-Mail Forum.'" <[log in to unmask]>, "[log in to unmask]"
.ail.com> <[log in to unmask]>
cc:
02/20/2003 09:51 Subject: RE: [TN] EXPIRED MATERIALS
AM
We were kicking around a similar idea, but regarding the $200 limit, is
that
the cost of the material on hand or the cost to replace it? For example,
you may have material that is expiring which is worth $100, but to purchase
it new, with a minimum purchase requirement, it may very well exceed $200.
What then?
Jim Marsico
Senior Engineer
Production Engineering
EDO Electronics Systems Group
[log in to unmask] <mailto:[log in to unmask]>
631-595-5879
-----Original Message-----
From: Gordon F. Davis Jr
[SMTP:[log in to unmask]]
Sent: Thursday, February 20, 2003 10:46 AM
To: [log in to unmask]
Subject: Re: [TN] EXPIRED MATERIALS
All work areas including the stock and production lines
perform a
check of
all materials (typically done the last day of the month or the
first
of the
month) to determine which materials expire in the next 30
days.
From
there, if the material cost is less than $200, and it is not
needed
within
the next 30 days, it is disposed of in accordance with our
environmental
policies. If the material is needed for build or it is
greater than
the
$200 set point, it is submitted to the cognizant materials
engineer
for
recertification testing. From there, the cognizant materials
engineer has
approximately 30 days to have the material tested and
determine if
it can
be extended. If it tests satisfactory, the material is
relabeled
with a
shelf life that is half of the original shelf life. This
system
typically
works very well. We find that most materials tested for
recertification
pass. Very seldom do we retest materials for a second
extension.
We also
do our best to minimize excessive stock to reduce the
potential for
expired
materials needing recertified.
Gordon Davis
Sr. Materials and Processes Engineer
Rockwell Collins
"Marsico, James"
<James.Marsico@DP To:
[log in to unmask]
.AIL.COM> cc:
Sent by: TechNet Subject: [TN]
EXPIRED MATERIALS
<[log in to unmask]>
02/20/2003 09:27
AM
Please respond to
"TechNet E-Mail
Forum."; Please
respond to
"Marsico, James"
Hello Technet:
I'm looking for information regarding what other companies do
with
expired
consumable materials. In the past, when more resources were
available, we
had the luxury of having a fully staffed Materials Lab,
consisting
of both
Engineers and Technicians. One of their functions was to test
materials
that were due to expire, in the hopes of extending the shelf
life.
This
was
a normal course of business and most materials were
successfully
extended.
Nowadays resources are limited, and we're looking into
reducing the
shelf
life extension process. One problem is that some materials
have a
minimum
purchase requirement, much more than can be used up within the
manufacturer's recommended shelf life. Again, what I'm
looking for
is
what
others do to 1) limit inventory and 2) what is done with
expired
material.
Please keep in mind that we have to answer to either the DoD
or FAA,
so
proper control is important.
Thanks,
Jim Marsico
Senior Engineer
Production Engineering
EDO Electronics Systems Group
[log in to unmask] <mailto:[log in to unmask]>
631-595-5879
---------------------------------------------------
Technet Mail List provided as a free service by IPC using
LISTSERV
1.8e
To unsubscribe, send a message to [log in to unmask] with
following
text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send
e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail
to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm
for
additional
information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700
ext.5315
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a free service by IPC using
LISTSERV
1.8e
To unsubscribe, send a message to [log in to unmask] with
following
text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send
e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail
to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm
for
additional
information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
