Charlie,
If memory serves, which will have to do since I don't have a GR-78 handy,
Bellcore took a slightly different approach to the equivalency factors used
by the MIL-STD documents.  They had a procedure to determine the ROSE
instrument response to a set standard and you judged the result from that
procedure.  I think it was found in either Section 13 or Section 14 of
GR-78.  I don't thnk they ever made reference to equivalency factors.  Such
factors have been shown to be bogus anyway.

Doug Pauls




                      Charlie Pitarys
                      <charlie_pitarys@        To:       [log in to unmask]
                      KYZEN.COM>               cc:
                      Sent by: TechNet         Subject:  [TN] Ionic Equivalence
                      <[log in to unmask]>


                      02/27/2003 10:16
                      AM
                      Please respond to
                      "TechNet E-Mail
                      Forum."; Please
                      respond to
                      Charlie Pitarys






I need to meet a Bellcore requirement on an assembly of 6.45ugrams/sq.in.
(Based on the pwb surface area)

The assembly has 633.5 sq.in. surface area.

The customer has supplied me with documentation from;
Physical Design and Manufacture of Telecommunications Products PWB Assembly
Requirements,  GR-78-CORE, Issue 1, Sept 1997. Section 7.1.3.9

I have an Omegameter 600. Is there an equivalence factor, etc? Or is it a 1
to 1 deal?

Thanks in advance.

Charlie
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------