We have a roll of silver solder in house, and I want to try a little project
with a couple heatsinks...

One's copper, the other is aluminum...  They've been lapped, and have
near-mirror finish...  I'd like to take 1/32" off both and drop on an even
coat of this silver solder...  I don't know how well they will bond, and
wonder if some chemicals will need to be used to aid in the bonding
process...

Or do I just let it drip onto the surface??

After the silver's on there, I'm gonna lap THAT finish to mirror-ish quality
and run some temperature tests...

Any advice??

Best Regards,
John Grabski III
Badger Technologies, Inc.

---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------