I'll leave the technical question to the experts, but....

If you go to www.ipc.org, and click on Online Resources and Databases
on the left hand side, Then on the link for Email Help Forums, there are
instructions on how to change particular ListServ settings. I think the
one you need to exercise is Set TechNet Repro, in a message to
[log in to unmask] with no subject. There is also a web interface where
you can change your options which requires you to set up a login and is
a little more difficult to perform.

Blair

>>> [log in to unmask] 02/19/03 07:02PM >>>
I appreciate all of the responses I get from the people on this board
very
much.

I have 2 more questions I was hoping to get some help on.

1. Why can't I see my posts on the board?

2. Does anyone know of a good article or a rule of thumb for
switching from a HASL to ENIG finish for assembly. We are
looking at replacing some QFP packages with BGA packages
but for other reasons we really need to have a HASL finish.
I am trying to find some resource that would give me a idea
of the break point where you really should go to a flat finish

Any input would be appreciated.

Thanks
John Foster

---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV
1.8e
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for
additional
information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
-----------------------------------------------------


**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.

This footnote also confirms that this email message has been swept
for the presence of computer viruses.

www.hubbell.com - Hubbell Incorporated
**********************************************************************

---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------