Subject: | |
From: | |
Reply To: | (Leadfree Electronics Assembly Forum) |
Date: | Mon, 27 Jan 2003 15:40:44 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
You need to give a bit more details, like the kind of solder alloy and flux
you are using
-----Original Message-----
From: Rick Thompson [mailto:[log in to unmask]]
Sent: January 27, 2003 2:05 PM
To: [log in to unmask]
Subject: [LF] Immersion gold vs flash gold with Lead-free solder paste?
Has anyone had any experience using Lead-free solder paste on a Flash gold
finish? We're currently having some solder wetting issues with lead-free on
flash gold where some of the pads on the boards exhibit complete lack of any
wetting. It almost looks like what you get when you reflow solder paste on
a ceramic substrate, where the solder just balls up. Is this an inherent
problem with flash gold or do I have some kind of abnormal processing issue
at the board vendor?
Thanks in advance.
Rick Thompson
Sr. SMT Process Engineer
SMTEK International, Inc.
+1 (805) 532-2800
[log in to unmask]
Rick Thompson
Sr. SMT Process Engineer
SMTEK International, Inc.
+1 (805) 532-2800
[log in to unmask]
-------------------------------------------------------------------------------Leadfee Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Leadfree
To temporarily stop delivery of Leadree for vacation breaks send: SET Leadfree NOMAIL
Search previous postings at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-------------------------------------------------------------------------------
|
|
|