TECHNET Archives

December 2002

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Randy Bock Sr." <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Fri, 27 Dec 2002 13:38:42 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (56 lines)
Glyptol works well as a witness mark.

----- Original Message -----
From: "Phil Nutting" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, December 27, 2002 1:30 PM
Subject: [TN] marking torques screws


> Hi everyone,
>
> Do any of you have experience with marking screws that have been torqued?
We are thinking that there should be some "paint" on the screw driver tip
when it is inserted into the head so when completely torqued it can be
identified.  Just painting on some paint after the fact can let a loose
screw through inspection.
>
> Just to make the whole project harder we need a material that will not
dissolve in Shell Diala AX transformer oil. Also long pot life, but quick
cure once applied would be good.  I know, that would be a good trick.
>
> One thought was simply using finger nail polish.
>
> What are your thoughts?
>
> Thanks,
>
> Phil Nutting
>
> ---------------------------------------------------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
> -----------------------------------------------------
>
>

---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------

ATOM RSS1 RSS2