I have a flex circuit application which requires low trace to trace leakage current (< 10 nA @ 10 V (1 G ohm), 75 C, low humidity). Layer to layer leakage measures ~3 nA. The construction is 4 layer with 7 mil lines and spaces. The critical traces are ~14 inches long and not guarded. This translates to a required resistivity of ~2E12 ohms/square for the adhesive system. Samples of this design show lot to lot variation from 3 nA to 300 nA @ 10 V.
Does anyone have a flex process optimized for high insulation resistance?
Thanks,
Wes Melander
Agilent Technologies
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------