TECHNET Archives

December 2002

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Dale Ritzen <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Tue, 10 Dec 2002 13:52:11 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (36 lines)
Since IPC-A-600 doesn't have much to say about this...

We recently started seeing quite a lot of metallic debris encapsulated in
solder resist from several of our board suppliers. These bare boards are to
be used as a class 3 SMT/PTH platform. There are few references to this in
any standard I have read (including IPC-A-610, sect. 7.2), so I'd like some
feedback on what everyone else is seeing these days and on what they
believe the problem to be (or if they don't believe it to BE a problem).

My take on it is that some board houses may be taking short cuts or saving
money by not using fresh solder resist as often as needed, thus building up
the amount of debris left over from each previous board that has been
coated and leaving it on the following boards. Filtering the resist to
remove this debris before using it again would be helpful, if workable. As
the end user of this I find it bothersome (even though it IS encapsulated
by the resist) as it indicates to me that the supplier may be trying to cut
corners in the current economic climate.

Okay, so is this a real problem or is it a "who cares" issue? On a board
that is to be used as a class 3 platform, it seems to me that this IS an
issue, especially in the rising incidents of debris seen in the resist.

I have pictures of what I'm talking about. If you'd like to see them send
email and will forward them to you for review. Thanks!

---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------

ATOM RSS1 RSS2