Carrie,
Maybe we need a special "Whacking Stick for that too." The Inspectors
"board of education."
What's the TM 650 spec for mechanical stress testing? I don't have it handy.
(Sorry)
All I've ever "seen" in IPC, to actually address the thread a little bit,
is referecnces to optics and methods required to perform inspections. Eyes
are technically 'optical equipment' so it must be inferred, (Particularly in
any ISO shop) that the use of properly functioning or "made-capable'
apparatus is a requirement to perform any tasks leading to product
realization, particulalrly when the apparatus are attached to your greatest
resource.(Yeah, I'm the ISO mgr too.)
I'd say that eye exams are great addition to any certification criteria but
not just for inspectors. Try bringing in a local eye doctor to set up an
"Eye inspection station" for the day. Make it optional, let everyone go
through the course of the day, and maybe the doctor gets a bunch of
refferals. (I doubt the Doc's will go for it, but hey, its worth a try.)
But I can't see IPC setting a standard for that. What's next, the Lower GI
joe spec, the liver spec, acceptable tolerance for nagging from your boss
spec....wait that leads to mechanical stress testing again doesn't it?.
Eyes need inspections too.
Steve
----- Original Message -----
From: "Morse, Carrie" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, November 19, 2002 12:44
Subject: Re: [TN] Vision Requirements for Inspectors
> Hmmmm.
> Randy, I see a lot of people on the road with driver's licenses, but, they
still can't drive.
> I recommend a more stringent means of ensuring that what an inspector sees
and calls out as good or bad really is what he says it is.
>
> -Carrie
>
> -----Original Message-----
> From: Randy Bock Sr. [mailto:[log in to unmask]]
> Sent: Tuesday, November 19, 2002 12:41 PM
> To: [log in to unmask]
> Subject: Re: [TN] Vision Requirements for Inspectors
>
>
> You may recall the initial NASA HDBK 5300 required all inspectors and
> operators to have vision tested including color blindness tests.
>
> IPC does not require this that I am aware of. Corrected vision is really
a
> good thing both from a company and personnel stand point.
>
> As a part of the Training and Certification you could as a company
policy
> require
> eye exams. After all, you have to take an eye exam for a drivers license,
> std of commercial.
>
> Randy
>
> ----- Original Message -----
> From: <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, November 19, 2002 10:53 AM
> Subject: [TN] Vision Requirements for Inspectors
>
>
> > Technetters,
> >
> > We are bouncing around the idea to formally "Certify" our inspectors. I
> have
> > seen on this site several times that an "Eye Exam" is part of that
> > certification. What exactly are they checking for during that eye exam
> > (Color blindness, healthiness of eyes, 20/20??)?
> >
> > Would like to hear from as many as possible on the subject of the eye
> exam,
> > plus how you certify your inspectors.
> >
> > Thanks in advance for your responses,
> >
> > Carl Barnes
> > Production Process Analyst
> > 480-968-6790
> > extension: 4236
> > Page At: 602-201-1435
> >
> > ---------------------------------------------------
> > Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
> > To unsubscribe, send a message to [log in to unmask] with following text
in
> > the BODY (NOT the subject field): SIGNOFF Technet
> > To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> > To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> > Search the archives of previous posts at:
http://listserv.ipc.org/archives
> > Please visit IPC web site http://www.ipc.org/html/forum.htm for
additional
> > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
> ext.5315
> > -----------------------------------------------------
> >
>
> ---------------------------------------------------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
> -----------------------------------------------------
>
> ---------------------------------------------------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
> -----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
