I just tried using the PSLM for a typical pcb of ours - nothing fancy, but
Mil Spec. Lots of big holes, wide traces and spacing, anything over 7
layers but low volume/prototype and ENIG (or not ENIG). I didn't specify
any specific facilities, to leave the selection as open as possible and
also tried varying some of the parameters and leaving many out to see what
I got back.

I got nothing back for Mil. UL approved gave me one supplier. Varying some
more of the parameters, I either kept or lost this one supplier. Not very
useful as a supplier finder!

Peter



Don Vischulis <[log in to unmask]>      03/10/2002 02:58 AM
Sent by: TechNet <[log in to unmask]>

Please respond to "TechNet E-Mail Forum."; Please respond to Don Vischulis

              To:  [log in to unmask]
              cc:  (bcc: DUNCAN Peter/Asst Prin Engr/ST Aero/ST Group)
              Subject: Re: [TN] board shop capability








Susan:

Capability information is still available online at
http://www.ipc.org/html/fsresources.htm.  Select the Product/Services
Locator Matrix (PSLM) for the search engine.  Each company is responsible
for maintaining it's own data.

Don Vischulis




-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of [log in to unmask]
Sent: Wednesday, October 02, 2002 10:46 AM
To: [log in to unmask]
Subject: [TN] board shop capability


Greetings to All
I finally found what I was looking for - in the 1998 IPC membership
directory
there was a table that listed each of the member companies and the
capabilities for each company.  It was a great idea that is no longer in
the
current membership directory.

Take a look at the 98 version, if you still have it.  Maybe IPC could think
about re-instating the table - looks like a lot of work for someone to get
that much info in a timely manner.

Susan

---------------------------------------------------------------------------------

Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
---------------------------------------------------------------------------------


---------------------------------------------------------------------------------

Technet Mail List provided as a free service by IPC using LISTSERV 1.8e To
unsubscribe, send a message to [log in to unmask] with following text in the
BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet
NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send
e-mail to [log in to unmask]: SET Technet Digest Search the archives of
previous posts at: http://listserv.ipc.org/archives Please visit IPC web
site http://www.ipc.org/html/forum.htm for additional information, or
contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------









[This e-mail is confidential and may also be privileged. If you are not the
intended recipient, please delete it and notify us immediately; you should
not copy or use it for any purpose, nor disclose its contents to any other
person. Thank you.]

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------