Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 26 Sep 2002 07:24:01 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Sorry... no solutions or recommendations, just a question. I'm not familiar
with Proflow, could someone explain?
Jim Marsico
Senior Engineer
Production Engineering
EDO Electronics Systems Group
[log in to unmask] <mailto:[log in to unmask]>
631-595-5879
-----Original Message-----
From: Jowan Iven [SMTP:[log in to unmask]]
Sent: Thursday, September 26, 2002 1:26 AM
To: [log in to unmask]
Subject: Re: [TN] Viscosity vs Temperature.
Hi Henry!
I've run into similar problems with the proflow system.
We also had very good results with normal squeegees and poor results
with
proflow.
I started a "Design of Experiment" to figure out what the reason
could be.
Very interesting data came out of the test , but not a solution.
One very important parameter was deliberately not included in the
test.
The solderpaste.
I just wanted the system to work with our standard solderpaste.
When the conclusion was that our standard solderpaste failed in the
proflowsystem, I started additional test with other pastes (types
and
brands).
The results look very promising for now.
Several pastemanufacturers are capable in producing a solderpaste
that works
well with Proflow.
Contact your current supplier and you will probably find a solution
together.
Best regards,
Jowan Iven
Process Engineer
Dept. Engineering & Technology
Stork Electronics BV
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Henry Rekers
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|