It's just good 'ol Isopropyl.
Brian Guidi
Product Engineer
Teledyne Electronic Technologies
Tel: (603) 889-6191 X:310
Fax: (603) 886-2977
E-mail: [log in to unmask]
Any technical information attached to this document is intended for the
recipient only. Also, the export and use of the information is regulated
by the export laws of the United States. Diversion contrary to U.S. law is
prohibited. U.S. law prohibits sharing this information with any end-user
for any end-use related to the design, development, production, stockpiling
or use of chemical, biological or nuclear weapons or missiles, without the
prior approval of the United States Government.
Eric Dawson
<[log in to unmask] To: [log in to unmask]
O.UK> cc:
Sent by: Subject: Re: [TN] INTEL P4 AND THE HEAT SINK THERMAL TAPE
TechNet
<[log in to unmask]
RG>
09/09/02 08:55
AM
Please respond
to "TechNet
E-Mail
Forum.";
Please respond
to Eric Dawson
Brian,
I know that I am going to regret this and I feel like one those lumbering
dinosaurs heading, inexorably, for the tar pit::: but what is "rubbing
alcohol" please?
Regards
Eric Dawson
> -----Original Message-----
> From: Brian L. Guidi [SMTP:[log in to unmask]]
> Sent: Monday, September 09, 2002 11:57 AM
> To: [log in to unmask]
> Subject: Re: [TN] INTEL P4 AND THE HEAT SINK THERMAL TAPE
>
> Moonman,
> A suggestion if I may. There is a very high quality after market
> thermal compound called 'Arctic Silver 3'
> http://www.coldcpu.com/product.asp?alphacatid=THERMGR. Simply use some
> rubbing alcohol to remove the existing thermal pad, and apply the Arctic
> Silver as you would a typical thermal grease. When used in conjunction
> with
> a high quality sink/fan combo, the cooling capabilities are excellent. I
> don't know if you do any overclocking, but if so, this method will yield
> you much better results than the typical cooling solutions provided by
the
> chip manufacturer.
>
> Brian Guidi
> Product Engineer
> Teledyne Electronic Technologies
> Tel: (603) 889-6191 X:310
> Fax: (603) 886-2977
> E-mail: [log in to unmask]
>
> Any technical information attached to this document is intended for the
> recipient only. Also, the export and use of the information is regulated
> by the export laws of the United States. Diversion contrary to U.S. law
> is
> prohibited. U.S. law prohibits sharing this information with any
end-user
> for any end-use related to the design, development, production,
> stockpiling
> or use of chemical, biological or nuclear weapons or missiles, without
the
> prior approval of the United States Government.
>
>
>
> Earl Moon
> <[log in to unmask] To: [log in to unmask]
> .COM> cc:
> Sent by: Subject: [TN] INTEL P4 AND
> THE HEAT SINK THERMAL TAPE
> TechNet
> <[log in to unmask]
> RG>
>
>
> 09/07/02 08:28
> PM
> Please respond
> to "TechNet
> E-Mail
> Forum.";
> Please respond
> to Earl Moon
>
>
>
>
>
>
> I'm working my third week end attempting to make my Intel P4 upgrade
work.
> Never mind the MS OS and Office crap, I just would like to know what, on
> that two ton massive heat sink, Intel uses to to dissipate heat.
>
> It is a film/tape medium as it rubs of on my finger tips. It makes sense
> that it is highly carbon loaded as it is such a good thermal transfer
> mechanism. I have about two grand in this crap build after having
replaced
> the Intel crap mother board with my old standby Asus variety with much
> easier install stuff.
>
> I love and have used my P3 stuff for over a year now but must move up.
> Damn
> this crap anyway. Anyway, does anyone have a line on what Intel places on
> the heatsink to dissipate heat and can I use a thermal grease or other
> tape
> that works "equally" as well? I sure as hell don't want to buy another
> Intel
> P4 processor just to get the heat sink crap thing.
>
> MoonMan
>
>
--------------------------------------------------------------------------
> -------
>
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at:
http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/html/forum.htm for
additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
> ext.5315
>
--------------------------------------------------------------------------
> -------
>
>
--------------------------------------------------------------------------
> -------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at:
http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/html/forum.htm for
additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
> ext.5315
>
--------------------------------------------------------------------------
> -------
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
