Sender: |
|
Subject: |
|
From: |
|
Date: |
Thu, 29 Aug 2002 11:47:03 -0400 |
Content-Type: |
text/plain; charset="iso-8859-1" |
MIME-Version: |
1.0 |
Reply-To: |
|
Parts/Attachments: |
|
|
Folks,
As a result of mergers we now have many duplicate and triplicate parts with
different part numbers in our ERP (ORacle) system. For example 3 resistors
part numbers - 123, 456 and 789, all are 1K, 5%, 1/8W, 0805.
The apparent solution (to maximize buying power and drive MRP) would be to
assign a common part number. But, if all the duplicate and triplicate parts
(thousands) are changed to a common part number at least 66% of the
schematics, CAD data, libraries, etc. will require changes. Hopefully
there's a less costly solution.
Is there anyone out there that can provide some insight?
Thanks,
Rick
Richard G. Smith
CAD Services Manager
C-COR Broadband Communications
999 Research Parkway
[log in to unmask]
Meriden, Ct. 06450
PH: 203-639-7670
FX: 203-317-4421
www.c-cor.net
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|