LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

TECHNET Archives

July 2002

TechNet@IPC.ORG

	LISTSERV Archives
	TECHNET Home
	TECHNET July 2002

	Log In
	Register

	Subscribe or Unsubscribe

	Search Archives

Options:	Use Monospaced Font Show Text Part by Default Show All Mail Headers
Message:	[<< First] [< Prev] [Next >] [Last >>]
Topic:	[<< First] [< Prev] [Next >] [Last >>]
Author:	[<< First] [< Prev] [Next >] [Last >>]

Subject:	Re: Paste sit time
From:	"Vivari, John" <[log in to unmask]>
Reply To:	TechNet E-Mail Forum.
Date:	Wed, 31 Jul 2002 09:28:09 -0400
Content-Type:	text/plain
Parts/Attachments:	text/plain (44 lines)

Mike,

Speaking as a solder paste supplier there are two possible answers to your
request for "any information".

1) You most definitely can use one printer to feed two or more lines.
Either your current solder paste can do the job already or you switch to a
different paste that can.

2) You cannot possibly use one printer to feed two lines due to limitations
of the solder paste in use and a change is not considered a viable option.

Each paste has different capabilities with regards to how long it remains
effective both before and after printing.  Within our product selection,
effective life after print varies significantly across the full range of
products with a best case of well over 8 hours and a worst that is just
under 4.  Environmental conditions (temperature and humidity) can and do
both extend and reduce these times.

When asked a similar question by one of our customers, our recommendations
to the customers are product and environment specific.

Before making a decision, I recommend contacting your paste supplier to find
out what limitations they acknowledge for the product you are using.

John Vivari
Technical Service Engineer
EFD Inc.
www.efd-inc.com
<mailto:[log in to unmask]>
Ph: 401-333-3800 x2204
Fx: 401-333-4954

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2

LISTSERV.IPC.ORG