Hi Daan,
it's true, I tried a version of the Maestro 6 or 7 months ago. The new
features that you describe could fix my problem, I'll check it out as soon
as I can. Thanks again for your kindness.
Thanks also to all who answered. We do have the Unidoc, but it's not under
my jurisdiction. I will enquire if we have all the modules.
Best regards,
Ioan
> -----Original Message-----
> From: D.Terstegge [SMTP:[log in to unmask]]
> Sent: Monday, July 08, 2002 2:17 PM
> To: TechNet E-Mail Forum.; Tempea, Ioan
> Subject: Re: [TN] Inspection aids
>
> Hi Ioan,
>
> Do you mean you would like to see the partvalue inside the picture of each
> shape ? But then you'd have to print a largesized hardcopy, or you'd need
> to zoom in on each part to read the values on the computerscreen. And if
> the partvalues-data contain tolerances and voltages your hardcopy will
> become cluttered after all ! But perhaps I don't fully understand what
> you mean.
> If you've tried any version of my SMT-Maestro program later than 0.20 then
> you may know that it has the possibility to show values, shapes or
> partnumbers (depends on what kind of data is available in your centroid-
> or BOM-file) simply by moving the cursor over the parts.
> Currently I'm working on an option to import a scanned image of a "golden
> board" and combine it with a centroid-file and bom. When moving the cursor
> over the photo you'll see a zoomed-in image of the area you're pointing
> to, plus the value or other data of the nearest part. Would that help you
> ?
>
> For those who haven't tried SMT-Maestro: as long as you don't mind to
> download an upgrade every few months the software may be used free of
> charge. Download from <http://www.smtinfo.net/smtmaestro/smtmaestro.html>
>
> Daan
>
> ----- Original Message -----
> From: Tempea, Ioan <mailto:[log in to unmask]>
> To: [log in to unmask] <mailto:[log in to unmask]>
> Sent: Monday, July 08, 2002 3:12 PM
> Subject: [TN] Inspection aids
>
> Hi technos,
>
> lately I noticed the group is getting smaller, 1011 recipients, but
> since
> the quality of the forum did not diminish, I assume all the big boys
> are
> still there. And this is reassuring.
>
> Now, to get to my question. Our inspectors spend days to write the
> values of
> each part on the assembly drawings. This helps them inspect faster,
> but in
> terms of setup cost it sends everything through the roof. Not to
> mention the
> ECO control.
>
> I tried of course Daan's Maestro and it does a fantastic job when
> you look
> for a particular component. What I need is something that goes
> beyond and it
> would import the shapes of the components plus the values right
> inside these
> shapes.
>
> The question is: is anybody aware of the possibility to generate
> this kind
> of information right from the CAD system? Just another exported
> file, right
> at the source, by the PCB designer. If not, any software available
> that
> would do this?
>
> Thanks,
> Ioan
>
>
> --------------------------------------------------------------------------
> -------
> Technet Mail List provided as a free service by IPC using LISTSERV
> 1.8d
> To unsubscribe, send a message to [log in to unmask]
> <mailto:[log in to unmask]> with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask] <mailto:[log in to unmask]>: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask] <mailto:[log in to unmask]>: SET Technet Digest
> Search the archives of previous posts at:
> <http://listserv.ipc.org/archives>
> Please visit IPC web site <http://www.ipc.org/html/forum.htm> for
> additional
> information, or contact Keach Sasamori at [log in to unmask]
> <mailto:[log in to unmask]> or 847-509-9700 ext.5315
>
> --------------------------------------------------------------------------
> -------
>
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
