Is this it?

www.ipc.org/html/TRISlidesPbRule.ppt

SOLDERING EMISSION FACTOR
. A study by the School of Public Health at the University of Illinois
measured an average of 86 mg/hr for uncontrolled lead emissions from three
wave soldering lines.

. Available from the NIOSH website via a search at:
http://outside.cdc.gov/BASIS/niotic/public/tic/SF

Dave Fish
----- Original Message -----
From: "Rick Thompson" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, June 11, 2002 2:22 PM
Subject: [TN] Lead Emission Calcs for EPA TRI Reporting?


> In researching reporting requirements for the new EPA TRI Lead Reporting
> requirement, I came across a calculation factor used to estimate
> emissions from wave soldering operations.  Unfortunately, I seem to have
> misplaced it and the site I got it from (attributed to aging).
>
> I've searched the EPA site, ComplianceNet forums and other places I
> thought it might have been, but can't locate it.  Can anyone tell me
> what the conversion factor is or where I might find this information?
> I'm assuming that I'm not the only one dealing with this for the first
> time so I'm hoping someone has dealt with it recently.
>
> Thanks in advance,
>
>
> Rick Thompson
> Ventura Electronics Assembly
> 2655 Park Center Dr.
> Simi Valley, CA 93065
>
> +1 (805) 584-9858   x-304  voice
> +1 (805) 584-1529 fax
> [log in to unmask]
>
> --------------------------------------------------------------------------
-------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt delivery of Technet send e-mail to [log in to unmask]:
SET Technet NOMAIL
> To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
> --------------------------------------------------------------------------
-------
>

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------