Steve

Careful, if the design doesn't belong to your client. You could be in
trouble if you copy a 3rd party design.

Brian

Steve Gregory wrote:
>
> Hi all,
>
> I've been approached by someone looking to get some gerbers made for a
> PCB that has no documentation, gerbers, or anything...all there is an
> assembly.
>
> Some particulars about this assembly make it sort of unique:
>
> 1. It's a RF amplifier that is bonded inside a chassis...
> 2. Nice thing though, it's just a double-sided board with nothing but
> a solid ground
>    plane on the bottom.
> 3. The chassis that it's in is only about .250" deep...
>
> All that's needed is a set of gerbers for the PCB.
>
> Anybody want to do this?
>
> Thanks!
>
> -Steve Gregory-

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------