TECHNET Archives

May 2002

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Barry Gallegos <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Tue, 21 May 2002 06:58:48 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (59 lines)
Susan,
Take a look in IPC-A-610 on page 5-17,
paragraph 5.2.7.2 Mounting - Wire/Lead Termination-
Printed Board - Clinched.

It may give you some insight.

Barry.


-----Original Message-----
From: [log in to unmask] [mailto:[log in to unmask]]
Sent: Monday, May 20, 2002 3:36 PM
To: [log in to unmask]
Subject: [TN] assembly spacing


I have a component lead that is clinched on the bottom and the lead is
almost
touching the surface of a conductor.  Good old 001C says that the
oreintation
of the clinch relative to any conductor is optional.  However, it appears
that direction is causing the problem.  Of course the assembly is conformal
coated and it is nearly impossible to determine the exact spacing from the
surface.

Are there other guidelines for this condition?

Thanks for any info
Susan Mansilla
Robisan Lab

----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2