TECHNET Archives

March 2002

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Ken Patel <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Thu, 21 Mar 2002 10:04:01 -0800
Content-Type:
text/plain
Parts/Attachments:
text/plain (28 lines)
Technetters,
I have a problem: A small daughter card (2" x 3") is mounted on a mother
board. Daughter card has a mating connector (without locking mechanism)
along the one of long edge. Other edge of the daughter card is fastened
using stand-off and screws to mother board.

As this connector is not a lock-in type, any twist to the board can make
connector popping out so slightly that it fails during the test.
Fastening at one end is not enough and the vendor does  not make
connector with lock-in mechanism. Hence, looking for ideas as how to
secure the daughter card without going through respinning of the fabs.
May be one of you might have faced the similar problem. The gap between
daughter card and mother board is about 0.375".

re,
Ken Patel

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2