WOW...And you pay an additional 10% for the boards???
James,
It should depend on the application, certainly a standard HASL board does
not need that degree of packaging protection, for Entek, immersion tin, etc,
this may be feasable. Other considerations are how soon before the boards
will be used? You don't need to hermetically seal them if they are headed
straight from the dock to the assembly line...you might however, need that
degree of protection if they are going to an outdoor assembly shop on some
south pacific island...located on the beach, in the summertime...
It all depends on the application, surface finish, storage facility,
assembler...etc etc etc...
Question...your placing the desiccant pack in the outer package instead of
in the package containing the board??? Does this buy you anything? I would
think the desiccant pack would be more effective in the package containing
the board you do not want moisture around...hmmmm...
Franklin
----- Original Message -----
From: "Marsico, James" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, March 20, 2002 3:09 PM
Subject: [TN] PWB PACKAGING
> Hello Technet, here's a simple question... What are your requirements for
> packaging PWBs when shipped from your board supplier? We require that
> boards are individually wrapped in corrosion inhibiting paper, then placed
> in a zip-lock ESD bag. Multiple sealed bags containing the individual
> boards then get placed in another sealable bag along with a desiccant and
> humidity indicator, then sealed. Is this asking for too much?
> Jim Marsico
> Senior Engineer
> Production Engineering
> EDO Electronics Systems Group
> [log in to unmask] <mailto:[log in to unmask]>
> 631-595-5879
>
> --------------------------------------------------------------------------
-------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt delivery of Technet send e-mail to [log in to unmask]:
SET Technet NOMAIL
> To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
> Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
> Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
> --------------------------------------------------------------------------
-------
>
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
