Hi Scott,

I'm not familiar with lubricants, but I think you are trying to fix a poor
design. Why do you need 3 connectors? It's pretty hard to have the
parallelism and the position tolerance controlled for 2 connectors. With
three you go from line into plane, a lot harder to controll.

If you have an option, have the board re-designed for a single connector
that matches the gold finger pattern of your backplane.

Just a thought,
Ioan

> -----Original Message-----
> From: Scott Kauling [SMTP:[log in to unmask]]
> Sent: Wednesday, March 20, 2002 4:01 PM
> To:   [log in to unmask]
> Subject:      [TN] Card Edge Connector
>
> We are inserting a backplane board with gold fingers into a mother board
> with three connectors to accept the gold fingers.
>
> Is anyone out there that has heard of, or is using some sort of lubricant
> to insert boards into such connectors?
>
> If you are what are you using?
>
> SCOTT
>
> --------------------------------------------------------------------------
> -------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt delivery of Technet send e-mail to [log in to unmask]:
> SET Technet NOMAIL
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search previous postings at: www.ipc.org > On-Line Resources & Databases >
> E-mail Archives
> Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
> ext.5315
> --------------------------------------------------------------------------
> -------

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------