Hi Al! Check this website - these folks make a nice basket(s) in a variety
of shapes:

www.artcraftwelding.com

Dave Hillman
Rockwell Collins
[log in to unmask]




[log in to unmask]@ipc.org> on 03/13/2002 09:18:49 AM

Please respond to "TechNet E-Mail Forum." <[log in to unmask]>; Please respond
       to [log in to unmask]

Sent by:    TechNet <[log in to unmask]>


To:    [log in to unmask]
cc:

Subject:    [TN] Cleaning Baskets


Hello Technet,

I'm looking for alternative-style baskets / methods to prevent damage (rips
parts off) double-sided boards.  I thinking of having our st.st. baskets
coated with plastic.

Background: I usually place the boards directly on the in-line cleaner's
conveyor (which also has a top/hold-down  conveyor).  I had a board that we
thought may get damaged without placing in a basket (24" x 20" x 1.75" with
1/4" mesh).  However, any slight movement - either during loading/unloading
or cleaning - rips off the higher profile smt parts.

Any suggestions?

Thanks in advance for your help,


Al Kreplick
Sr. Mfg. Eng.
Teradyne, Inc.
500 Riverpark Drive
North Reading, MA 01864
Tel: 978-370-1726
Fax: 734-661-5352

---------------------------------------------------------------------------------

Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]:
SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
---------------------------------------------------------------------------------

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------