Yeh, they and many other things get shorted out often. Our design engineers,
in their infinite wisdom did many things wrong. There's one 3 inch square
analog area they placed at the corner of an 11x11" board with you know what
- about a dozen of those blue beuaties, electrolytic caps that is so wave
solder a necessity. Some other through hole stuff as well that needn't be.
Could have been SMT or left on the R/F daughter card. It's all a big compromise.
Just thinking out loud really about the bottom side solder shields. Anyone
else so I don't have to go to blind vias or wave pallets?
MoonBaseMan
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------