I'm with Earl on this. Don't cheap out on the printer it is the most
important part of your process.
I worked with an old deHaart in the early 90's it was good down to 50 mil
below that things got too squirrelly.

> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]]On Behalf Of Charles Caswell
> Sent: Friday, March 01, 2002 1:47 PM
> To: [log in to unmask]
> Subject: [TN] Dehaart stencil printer
>
>
> Happy Friday!
>
> We are looking at a Dehaart MPC-29 printer.  Our concern is how
> well are they supported seeing how the company is out of business
> (or are they?).  The price is certainly right on the few we have located.
>
> Optionally is an MPM AP-36 which is a fully automatic inline
> printer but at almost 3 times the cost.
>
> Our desire is to stick with a macine that uses a 29x29 stencil
> frame so that we can use our current frames.  We need a printer
> capable of 15x25 print/board area.
>
> Any comments on the Dehaart line would be appreciated.
>
> Charles Caswell
> Process Lead, PCB
> Frontier Electronic Systems
>
> ------------------------------------------------------------------
> ---------------
>
> ------------------------------------------------------------------
> ---------------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search previous postings at: www.ipc.org > On-Line Resources &
> Databases > E-mail Archives
> Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
> information, or contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ------------------------------------------------------------------
> ---------------
>

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------