Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 22 Mar 2002 11:22:19 +0530 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Technetters,
We are currently running an 8 layer PCB, 1.6mm thickness. In the last run of
approx. 400 nos. we found approx. 10 nos PCBs with blisters in some specific
areas. In approx. 40-50 nos. the blistering is not there but the laminate
has discoloration.
Can anybody suggest any possible causes of the same.
We are not baking the PCBs prior to processing, but the boards are in vacuum
packing and the packing is opened only at the Stencil printing stage.
Any suggestions welcome
Regards
Vinit Verma
Flextronics Technologies (India) Pvt. Ltd.
88A, Electronic City, Hosur Road,
Bangalore-561 229
Tel: +91-80-852 0022, Ext. 161 ; Fax: +91-80-852-1022
E-Mail : [log in to unmask]
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|