Hello Technetters,

Need everyone's input on this issue.

Have a customer who is unhappy with "Brush" (Bristle or similar) fibers on
board. They are specifically mentioning section 7.2 and figure 7-4. Picture
shows many instances of particulate matter. We are seeing 1 or 2 brush
fibers (non-conductive). What is the issue or feelings of the experts out
there on this being a defect? The board is OK except for the brush fibers.
The customer does not have a standard saying fibers are not allowed, just
citing the above mentioned paragraph and verse.

Thanks in advance for your input,

Carl Barnes
Production Process Analyst
480-968-6790
extension: 4236
Page At: 602-201-1435

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------