Sender: |
|
X-To: |
|
Date: |
Fri, 8 Mar 2002 10:31:23 -0700 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
quoted-printable |
Content-Type: |
text/plain; charset="iso-8859-1" |
From: |
|
Parts/Attachments: |
|
|
Strippit made one of these waaaay back when.
-----Original Message-----
From: Dupuis, Dave [mailto:[log in to unmask]]
Sent: Friday, March 08, 2002 10:16 AM
To: [log in to unmask]
Subject: Re: [TN] looking for a name
At 11:05 AM 3/8/2002 -0500, you wrote:
>Good morning all,
>
>I know what I'm going to ask is outside the realm of circuit boards, but
>here goes anyway. Back in my formative years I used what I remember as a
>Rotodex Punch. It is a sheet metal punch with a large rotating head with
>round punches from 1/16 inch up to about 1½ diameter. It is used mostly
>for one-off jobs as this sort of thing would be part of the modern
>computer controlled sheet metal punching machines.
>
>I'm looking for the right name so I can look for one on the used
>market. It is always easier to find equipment when you use the right name
>or terminology.
>
>Thanks in advance.
>
>Phil Nutting
>Manufacturing Engineer
>Kaiser Systems, Inc.
>
>---------------------------------------------------------------------------
------
>Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt delivery of Technet send e-mail to [log in to unmask]:
>SET Technet NOMAIL
>To receive ONE mailing per day of all the posts: send e-mail to
>[log in to unmask]: SET Technet Digest
>Search previous postings at: www.ipc.org > On-Line Resources & Databases >
>E-mail Archives
>Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
>information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
>ext.5315
>---------------------------------------------------------------------------
------
Phil,
I remember using such a device and I think the name was ROTEX.
Regards,
David DuPuis, Associate Engineer
Rice Lake Weighing Systems
The Content of this message and/or attachments is proprietary and
confidential.
Please forward any misuse or inadvertent receipt to [log in to unmask]
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|