I don't have a source for your flip tables, but we used to use lots of those
tables with mass lead cutters.  Maybe a mass lead cutter supplier can give
you a lead. [Is that too may uses of the word "lead"?]  Try:

Q Corporation 301 River Derby, KS 67037  800.835.1099/316.788.3746 fax 7428
Fax [log in to unmask]

Dave Fish

----- Original Message -----
From: "Rick Thompson" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, February 27, 2002 9:50 AM
Subject: [TN] 'Flip-over' Assembly Fixtures?


> I'm looking for a 'flip-over' assembly fixture for large PCBs (20" x
> 18"). I need something that can have a board inserted, hand load a
> quantity of through-hole parts, close a cover and flip over to solder
> the parts manually.  I've found ones that handle 16" wide boards but
> none wider.  Does anyone know of a source for this type of fixture?
>
> Thanks in advance.
>
> Rick Thompson
> Ventura Electronics Assembly
> 2655 Park Center Dr.
> Simi Valley, CA 93065
>
> +1 (805) 584-9858   x-304  voice
> +1 (805) 584-1529 fax
> [log in to unmask]
>
> --------------------------------------------------------------------------
-------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt delivery of Technet send e-mail to [log in to unmask]:
SET Technet NOMAIL
> To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
> Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
> Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
> --------------------------------------------------------------------------
-------
>

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------