A document which may help you out is the IPC-TR-460A, Trouble Shooting
Checklist for Wave Soldering of Printed Wiring Boards. If your in to surface
mount the document is IPC-S-816 SMT Process Guideline and Checklist.
These documents should be able to help you out.
Good Luck,
Leo Lambert
EPTAC Corp.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Guy Ramsey
Sent: Thursday, February 28, 2002 6:59 AM
To: [log in to unmask]
Subject: Re: [TN] Solder Projections
Electrovert once published a wave soldeing troubleshooting chart. I have a
ragged old copy. It lists many poential causes of the condition.
Process Related: solder temp too low, wave height too low, wave uneven,
solder contaminated (use J-STD-001 to evauate solder purity J-STD-006 is
intended for new alloy material), preheat temp too high or too low, flux
contaminated, flux specific gravity too low, flux no nolonger active, flux
not making contact, flux foam head low, flux uneven, flux blow-off
excessive, pallet too hot, conveyor speed high, conveyor vibration, conveyor
angle low, early removal of board, board not seated properly.
Assembly Related: board contamination, component contamination, component
leads too long, improper board handling.
Board Fab Related: Board Oxidized.
Design Related: Pallet design, large plane on solder side, large unfilled
holes.
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]]On Behalf Of Mr. Leslie A. Pollak
> Sent: Wednesday, February 27, 2002 3:57 PM
> To: [log in to unmask]
> Subject: [TN] Solder Projections
>
>
> Hi,
>
> Could soemone tell me what causes solder projections or what we call
> icicles.
>
> Or point us to IPC documentation that would help us.
>
> Thanks
> Mr. Leslie A. Pollak
>
> ------------------------------------------------------------------
> ---------------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search previous postings at: www.ipc.org > On-Line Resources &
> Databases > E-mail Archives
> Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
> information, or contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ------------------------------------------------------------------
> ---------------
>
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
