Twin-Cone, fine wire abrasive stripping is done routinely on our magnet wire
which has a thin film of insulation.  It may work on yours as well.

Check out http://www.series4.co.uk/prodeqpt/section14/section14.htm

> Rainer G. Blomberg
> Honeywell -Space Systems Clearwater
> Staff Production Engineer
(727) 539-5534


-----Original Message-----
From: phil bavaro [mailto:[log in to unmask]]
Sent: Thursday, February 21, 2002 12:13 PM
To: [log in to unmask]
Subject: [TN] stripping insulation from polyu-nylon coated magnet wire


Anyone have a reliable safe method of removing the polyurethane and nylon
coating that protects magnet wire so that the wire can be used to solder as
a jumper wire.  I remember using a hot chemical salt type stripping bath
many years ago but was hoping that someone has found a better way to do
this since then.

----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------