Cathy;
We use obsolete stock but we also designed a board in house that will
actually light up if built correctly. This seems to really give the new
employees confidence in themselves. We also use kits from Practical
Components for our Fine Pitch training. Hope this helps. There are a lot of
good kits on the web if you dig.

Maxine Greenwood
Employee Development
Reptron Manufacturing Service,
Hibbing, Mn.

-----Original Message-----
From:   Cathy Killen [SMTP:[log in to unmask]]
Sent:   Friday, February 22, 2002 8:19 AM
To:     [log in to unmask]
Subject:        [TRAINERNET] Materials
Importance:     High

What PCBs do you use for training employees and are they re-useable? Do you
use obsolete stock, buy specific training PCBs? Any advice is welcome.
Thanks in advance for any replies.

Cathy Killen
Training Instructor
The information contained in the E-mail is confidential. It is intended
only
for the stated addressee(s) and access to it by any other person is
unauthorised.
The views expressed in this E-mail are those of the author, and do not
represent the views of Smtek Europe, its associates or subsidiaries, unless
otherwise expressly indicated.
Please note: It is your responsibility to scan this E-mail for viruses.

------------------------------------------------------------------------
---------
TrainerNet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF TrainerNet
To temporarily halt delivery of TrainerNet send the following message: SET
TrainerNet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
------------------------------------------------------------------------
---------

---------------------------------------------------------------------------------
TrainerNet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF TrainerNet
To temporarily halt delivery of TrainerNet send the following message: SET TrainerNet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------