Kathy

We have the The Hurricane Jet option from Electrovert that
 "produces a coherent sheet of high-pressure water across the entire
width of the conveyor belt." According to their literature.

What I have found so far is the manufacturer of the "sealed"
potentiometer recommends that we turn down the water pressure to less
than 60 PSI.  We had been running at around 80 PSI.

I am not familiar with the "Spray over Spray" term.  Can you define
this?

Did you turn down your pressure setting for any project or do you set
the pressure settings if the project has potentiometers on it and then
turn it back up?

Thanks for your response.

Paul
--
Paul Truit, Mfg. Eng.
RBB Systems, Inc.
4265C E. Lincolnway
Wooster, OH  44691
Ph. (330) 567-2906 ext 514
Fax (330) 263-5324
Email: [log in to unmask]

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------