Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 18 Jan 2002 06:48:37 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I agree with Dave, just want to add one: check the conveyor for vibration.
regards
Graham Collins
Process Engineer,
Northrop Grumman
Atlantic Facility of Litton Systems Canada
(902) 873-2000 ext 6215
>>> [log in to unmask] 01/17/02 10:02PM >>>
Hummm, surprising.
DPAK are fairly light [~ 0.300 gm] and have a relatively huge solderable
surface [~ 47mm^2/0.07in^2]. This weight to solderable area 6.3mgm/mm^2
[4.1gm/in^2] is well within both
* "Zarro Limit" of 30 gm/in^2.
* "Willis Limit" of 44gm/in^2.
From this perspective, DPAK numbers are similar to a mini-MELF and to a
SOIC16.
Are you soldering the tab? If so, how about:
* Loctite 3609 or equivalent
* Conveying the board differently
* Turning-down your bottom-side fans
Dave Fish
----- Original Message -----
From: "Kevin M. Bair" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, January 17, 2002 6:18 AM
Subject: [TN] D-Pak 2nd side reflow issues
> We are having problems with bottom side d-paks falling off when the top
> side of the board is being reflowed. Has anyone had this problem, and if
> so, what have you done to correct it?
>
> Thanks for your help,
>
> Kevin Bair
> Assembly Engineer
> Teradyne, Inc.
>
> --------------------------------------------------------------------------
-------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt delivery of Technet send e-mail to [log in to unmask]:
SET Technet NOMAIL
> To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
> Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
> --------------------------------------------------------------------------
-------
>
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|