Content-Type: |
text/plain; charset="iso-8859-1" |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Thu, 31 Jan 2002 13:38:57 -0800 |
MIME-Version: |
1.0 |
X-To: |
|
Reply-To: |
|
Parts/Attachments: |
|
|
Hi Dan,
I'm sure the pads and lines would be identical in both. I was
just thinking of the complex apertures that we sometimes get
in gerber 274X might not be a 100% one-to-one match with the
surfaces that we would end up with ODB++. I don't know that
they would be different but I do think there would be some
kind of difference, but hopefully a very small one.
I guess the question is what kind or tolerance are we going to
have to be considered 'different'. A difference of .000001
doesn't seem to qualify since we could never see it or even
measure it.
Mark
>From: Dan R. Johnson [mailto:[log in to unmask]]
>Sent: Thursday, January 31, 2002 10:05 AM
>To: TechNet E-Mail Forum.; Mark Steele
>Subject: Re: Re: [TN] ODB++
>
>
>Just a thought, wouldn't the gerber be absolute too? Just compare data
>rather than the image. I seem to recall an old OS that had a
>command called
>"compare".
>Dan
>
>
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|