What kind of air ionizers should one use for a conformal coating line ? I
was told that air ionizers help in keeping the dust away besides protecting
ESD sensitive parts on the boards. The application of masking tape and
removal of tape can cause undesirable ESD damage to electronic parts.
I will appreciate if someone can advise me where to find used -air ionizers
( qty: 6-10) and ionizing guns/ nozzles ( qty: 3-6 ). The air ionizers can
be benchtop units or overhead type- table mounted. The air ionizing guns or
nozzles are for drying out PCB assemblies which are sensitive to ESD.



Ashok Dhawan P.Eng.
Engineering
C-MAC Network Systems Inc.
1455 Mountain Roar
Winnipeg Manitoba R2X 2Y9
WWW.CMAC.COM
TEL (204) 631 7208
FAX (204) 631 7294

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------