Michael,
Started with 1 AirVac and has grown from there. With equipment like this,
nozzles, profiles, etc. once you're familiar with a particular machine you
tend to stick with it. In general very pleased with AirVac, although I would
add that our techs are the best and could probably work with any BGA rework
machine.
Must say that BGA rework is pretty exacting stuff. Wonder if some of these
smaller benchtop units make the grade.
Jeff Ferry
CEO
Circuit Technology Center, Inc.
www.circuittechctr.com
[log in to unmask]
978-374-5000
Sign up for our Free E-mail Newsletter at:
www.circuittechctr.com/general/free_email.htm
-----Original Message-----
From: Michael Bell [mailto:[log in to unmask]]
Sent: Tuesday, December 04, 2001 3:32 PM
To: [log in to unmask]
Subject: Re: [TN] Locating a BGA Rework Service
Jeff,
Six BGA rework station eh???? What type of stations are you using??? I am
just starting to look at various BGA rework stations for low volume, high
mix, do you know of any types that would suit this environment???
-----Original Message-----
From: Jeff Ferry [mailto:[log in to unmask]]
Sent: Wednesday, 5 December 2001 09:25
To: [log in to unmask]
Subject: Re: [TN] Locating a BGA Rework Service
David,
BGA rework is certainly more challenging than through hole or SMT. But, from
a service point of view, what makes BGA rework on a contract basis the most
difficult, is small volume. We have 6 BGA rework machines going all day and
the work progresses well until we're hit with the isolated board or two.
Developing the proper rework profile is essential and this is a tough
assignment with small lots. But, heck fortunately there are nuts like me out
there who'll do this stuff.
Jeff Ferry
CEO
Circuit Technology Center, Inc.
www.circuittechctr.com
[log in to unmask]
978-374-5000
Sign up for our Free E-mail Newsletter at:
www.circuittechctr.com/general/free_email.htm
-----Original Message-----
From: David Antreasian [mailto:[log in to unmask]]
Sent: Tuesday, December 04, 2001 11:12 AM
To: [log in to unmask]
Subject: [TN] Locating a BGA Rework Service
Hello All,
Looking for a few qualified, dependable contractors specializing in BGA
rework. Have tried several in the past, but results always seem mixed -
excellent on one board, not so good on the next (sloppy work, adjacent
parts reflowed, no documentation, turnaround way beyond quote). This is
for low volume repair. Prefer a medium-sized professional shop that can
handle x-ray, reball, and repair with a published track record of CLEAN,
reliable work and clear DOCUMENTATION on what was done and, of course,
need it as quick-turn. Not interested in training classes or buying
equipment. Who's the best out there ?
Thanks,
DavidA
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
