Quite often I see the need to add solder to the end caps of surface mounted ceramic capacitors. Normally I would do this with hot air and solder paste because of the part being more heat sensitive but some of the touch up areas I go to only have soldering irons for rework. Assuming the operator is using the correct tip size for the part and the temp set at 600 degrees F, does this pose a great threat to the component ( internal cracking from heat) ?
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------