Is the adoption notice available on the IPC web site?
Jim Marsico
Senior Engineer
Production Engineering
EDO Electronics Systems Group
[log in to unmask] <mailto:[log in to unmask]>
631-595-5879
-----Original Message-----
From: Mel Parrish [SMTP:[log in to unmask]]
Sent: Wednesday, December 19, 2001 6:31 PM
To: [log in to unmask]
Subject: Re: [TN] Mil Spec Equivalent for IPC-A-610
Hans
Depending on the exact year, the 454 (Requirement 5?) reference
could be to
any number of standards including WS-6536 or 45743, but you are very
correct
they were eliminated without any identified replacement. J-STD-001
has a
recent DoD adoption notice that I can send if you like, or you can
get it
from IPC directly.
Mel
-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Hinners Hans M
Civ
WRALC/LUGE
Sent: Wednesday, December 19, 2001 1:08 PM
To: [log in to unmask]
Subject: Re: [TN] Mil Spec Equivalent for IPC-A-610
Hello Fellow Techies,
Thanks for the comments!
The original drawings are from the late 80's and we're conformally
coating
the assembly instead of using an insulating foam so I get to
change/improve
things.
MIL-STD-2000 came out after the drawings (which reference
MIL-STD-454). And
then there's the disconnect when both specs got canceled without an
identified replacement. I'd rather identify a non-government
specification
supporting DOD's decision to get out of the spec. business. (They
had
better solder the thing to J-STD-001 or I've got bigger problems
than
getting a good coating.)
Happy Holidays.
Hans
Integrity First - Service Before Self - Excellence in All We Do
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Hans M. Hinners
Electronics Engineer
Warner Robins - Air Logistics Center (WR-ALC/LUGE)
226 Cochran Street
Robins AFB GA 31098-1622
mailto:[log in to unmask]
Com: (478) 926 - 5224
Fax: (478) 926 - 4911
DSN Prefix: 468
-----Original Message-----
From: Mel Parrish [mailto:[log in to unmask]]
Sent: Wednesday, December 19, 2001 5:10 PM
To: [log in to unmask]
Subject: Re: [TN] Mil Spec Equivalent for IPC-A-610
Hans
The only standard from the Mil specs that expressly addressed
acceptability
like 610 was the DOD-STD-2000, Volume 3. The other standards like
MIL-STD-2000 and 2000, Rev A included acceptability as would be
equivalent
to J-STD-001.
Mel Parrish
Soldering Technology International
Madison, AL
256 705 5530
256 705 5538 Fax
[log in to unmask]
-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Hinners Hans M
Civ
WRALC/LUGE
Sent: Wednesday, December 19, 2001 11:42 AM
To: [log in to unmask]
Subject: [TN] Mil Spec Equivalent for IPC-A-610
Hi All,
Can anyone remember the equivalent Mil spec for IPC-A-610?
Is it MIL-STD-454?
Hans
Integrity First - Service Before Self - Excellence in All We Do
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Hans M. Hinners
Electronics Engineer
Warner Robins - Air Logistics Center (WR-ALC/LUGE)
226 Cochran Street
Robins AFB GA 31098-1622
mailto:[log in to unmask]
Com: (478) 926 - 5224
Fax: (478) 926 - 4911
DSN Prefix: 468
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following
text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message:
SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources &
Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following
text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message:
SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources &
Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following
text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message:
SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources &
Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following
text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message:
SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources &
Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|