Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 16 Nov 2001 10:11:16 +0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi, All,
We have received a number of 12 layer ENIG-finished MLB's with blind via
hole groups, and which are destined to have BGA's (1.27mm pitch) populated
onto them. The boards measure 8.2" x 5.7" and they are warped to the extent
of one corner being raised by between 1.5mm and about 3mm. The axis of the
warp is the long side of a triangle whose other two sides measure about 5.7
x 5.7.
In this age of sensitive boards, does a technology or technique exist for
straightening the boards back into spec - they are class 3 boards - or is
this an area where angels still fear to tread?
The boards are desperately urgent, which is why I'm asking this rather than
simply rejecting them and having them re-made (which takes about a month).
TIA for any help.
Peter Duncan
[This e-mail is confidential and may also be privileged. If you are not the
intended recipient, please delete it and notify us immediately; you should
not copy or use it for any purpose, nor disclose its contents to any other
person. Thank you.]
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|