Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 3 Oct 2001 16:15:34 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Chris,
In my experience with swaged hardware, especially when used in your
frequency range, they should be soldered. I work with RF in that range
in low wattage (5-50) and if they are not soldered and become loose,
it's a nightmare to troubleshoot. Just swaging is not enough.
eventually, they will come loose as the fiberglass board compresses.
Tom Parkinson
WinTronics, Inc.
Chris Stack wrote:
>
> I need some advice about swaging connector pins. After they are swaged, is
> soldering still neccessary or will clamping down on the pad make an
> acceptable solder joint? The circuits they will be in are in the 450MHz -
> 1GHz range.
>
> Thanks For your help.
>
> Chris
>
> ---------------------------------------------------------------------------------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
> Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
> ---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|