Cathy: This should not be a problem for the bare (unloaded) PCB. However if
you are doing a double sided reflow and   misprint the second side you need
to verify that the first side components are compatible with the ultrasonics
you are using.


Regards

Michael Barmuta

Staff Engineer

Fluke Corp.

Everett WA

425-446-6076

-----Original Message-----
From: Cathy Killen [mailto:[log in to unmask]]
Sent: Friday, October 26, 2001 7:30 AM
To: [log in to unmask]
Subject: [TN] Cleaning paste when mis-aligned.
Importance: High


Hello All & the mountain dew man.
Can a mis-printed PCB be washed in a ultrasonic bath to remove all paste
particles?
Is there any danger of damaging innerlayers of PCB?

Thanks in advance.

Cathy Killen
Training Instructor
Smtek Europe Ltd.
The information contained in the E-mail is confidential. It is intended only
for the stated addressee(s) and access to it by any other person is
unauthorised.
The views expressed in this E-mail are those of the author, and do not
represent the views of Smtek Europe, its associates or subsidiaries, unless
otherwise expressly indicated.
Please note: It is your responsibility to scan this E-mail for viruses.

----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------