We would not bake the parts again, after reballing, sounds like you will be
meeting the requirments of the standard. I think it is a free download. If
you need the link let me know and I will try to find it. Might have been on
the ANSI page or JEDEC.

> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]]On Behalf Of Jeff Ferry
> Sent: Thursday, October 25, 2001 9:45 AM
> To: [log in to unmask]
> Subject: [TN] BGA Component Baking - Plastic Body
>
>
> BGA Guru's,
>
> We're doing a big project that requires removal/replacement of several
> hundred plastic BGA components. After removal we'll be reballing the BGA's
> and then reinstalling them. These are new builds, they're not coming back
> from the field.
>
> Who knows what J-STD-20, or any other reference, says about prebaking
> temp/time to eliminate possible moisture problems in the components or
> boards prior to initial removal? Removed parts will be stored in a
> desiccant chamber before and after reballing. Do we need to bake these
> parts again prior to installation? Do ya'all normally bake new
> build boards
> in this situation?
>
> Thanks for you recommendations.
>
> Jeff Ferry
> CEO
> Circuit Technology Center, Inc.
>
> ------------------------------------------------------------------
> ---------------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt delivery of Technet send the following
> message: SET Technet NOMAIL
> Search previous postings at: www.ipc.org > On-Line Resources &
> Databases > E-mail Archives
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information, or contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ------------------------------------------------------------------
> ---------------
>

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------