TECHNET Archives

October 2001

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Jon Moore <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Fri, 19 Oct 2001 14:24:22 EDT
Content-Type:
text/plain
Parts/Attachments:
text/plain (25 lines)
In a message dated 10/17/2001 12:59:27 PM US Eastern Standard Time,
[log in to unmask] writes:

<< Where do I find information regarding hole size, plating thickness
 recommedations regarding whether these should subsequently be soldered etc?
>>

The pin or connector manufacturer can give you the best data for holes sizes.
 I have done testing and also seen other data from testing at other
facilities showing that press fit compliant pins are more reliable
connections when NOT soldered - even more reliable than traditional soldered
PTH connectors.

Jon Moore

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2